Main Specifications
- Keyboard
- C – C: 37-notes (3 octaves), mini keyboard designed specifically for the MS-20 mini
- Manual controller
- Control wheel (center click), Momentary switch –>GND
- Input and Output
- Signal In: Amplifier Out,
Band pass filter Out,
CV Out (0 – +8.4V),
ENV Out (0 – +5V),
Trig Out (+5V–>GND),Signal out: Signal output (mono 1/8″ mini phone jack, 2Vp-p output impedance 3.5k Ω)
Head phones: Head phones output (Stereo 1/8″ mini phone jack, 33 Ω 48mW),
USB: Type B, USB-MIDI Input/Output
*Only note messages (velocity is not used) can be transmitted and received.MIDI: MIDI Input
*Only note messages (velocity is not used) can be transmitted and received.
- Power Supply
- DC9V
- Dimensions:
(W x D x H) - 493 ×257 ×208 mm / 19.41 x 10.12 x 8.19 inches
- Weight
- 4.8 kg / 10.58 lbs.
- Accessories
- AC adaptor (9V/1.7A), Patch Cord x 10
Detailed Specifications
- Control Section
- 1. Keyboard
- C – C: 37-notes (3 octaves), mini keyboard designed specifically for the MS-20 mini
- 2. Voltage Controlled Oscillator 1 (VCO 1)
- Scale (32′, 16′, 8′, 4′) (6 octaves, +cent, -cent)
Wave form (Triangle, Sawtooth, PW-Square, White Noise) (4 modes)
Pulse width adjust 1:1 – 1:infinity
- 3. Voltage Controlled Oscillator 2 (VCO 2)
- Scale (16′, 8′, 4′, 2′) (6 octaves, +cent, -cent)
Wave form (Sawtooth, Square, Pulse, Ring modulator) (4 modes)
Pitch (± 1 octave)
- 4. VCO Master control
- Master tune (± 100cent)
Portamento (max. 10sec)
FFrequency modulation intensity by MG/T.EXT (-5V – +5V)
Frequency modulation intensity by EG1/EXT (-5V – 0V)
- 5. VCO Mixer
- VCO 1 Level
VCO 2 Level
- 6. Voltage Controlled High Pass Filter (VCF HPF)
- Cutoff frequency (50Hz – 15,000Hz)
Peak (flat – self OSC)
Cutoff frequency modulation intensity by MG/T.EXT (-5V – +5V)
Cutoff frequency modulation intensity by EG2/EXT (-5V – +5V)
- 7. Voltage Controlled Low Pass Filter (VCF LPF)
- Cutoff frequency (50Hz – 15,000Hz)
Peak (flat – self OSC)
Cutoff frequency modulation intensity by MG/T.EXT (-5V – +5V)
Cutoff frequency modulation intensity by EG2/EXT (-5V – +5V)
- 8. Envelope Generator 1
- Delay time (10sec)
Attack time (10sec)
Release time (10sec)
- 9. Envelope Generator 2
- Hold time (20sec)
Attack time (10sec)
Decay time (10sec)
Sustain level (0V – 5V)
Release time (10sec)
- 10. Modulation Generator (LFO)
- Wave form (Positive Sawtooth – Triangle – Negative Sawtooth, Wide Pulse – Square – Narrow Pulse)
Frequency (0.1Hz ～ 20Hz)
- 11. Manual controller
- Cntrol wheel (center click)
Momentary switch –>GND
- 12. Power switch and Volume
- Volume
- 13. Indicator
- LED (KBD trigger, Modulation Generator rate, Power ON)
- External Signal Processor
- 1. Control section
- Input signal level
Low cut frequency (50Hz – 2,500Hz)
High cut frequency (100Hz – 5,000Hz)
CV adjust
Threshold level
- 2. Input and Output
- Signal In
Amplifier Out
Band pass filter Out
CV Out (0 – +8.4V)
ENV Out (0 – +5V)
Trig Out (+5V–>GND)
- 3. Indicator (LED)
- Peak indicator
Trigger indicator
- Patch Panel
- 1. Keyboard
- Keyboard control voltage output (Exponential) (0 – +8V)
Keyboard trigger output (+5V–>GND)
VCO-1 + VCO-2 control voltage input (Linear response) (0 – +8V)
VCO-2 control voltage input (Linear response) (0 – +8V)
- 2. VCO
- VCO-1 + VCO-2 external frequency control input (OCT/V) (-5V – +5V)
- 3. VCF
- External signal input (3Vp-p max.)
External High pass filter cutoff frequency control input (2OCT/V) (-5V – +5V)
External Low pass filter cutoff frequency control input (2OCT/V) (-5V – +5V)
- 4. VCO + VCF
- Total external modulation input (T.EXT) (-5V – +5V)
- 5. VCA
- External initial gain control input (0 – +5V)
- 6. EG
- EG 1 envelope signal normal output (-5V – 0V)
EG 1 envelope signal reverse output (+5V – 0V)
EG 1 + EG 2 trigger input (–>GND)
EG 1 trigger input (–>GND)
EG 2 envelope signal reverse output (+5V – 0V)
- 7. MG
- Triangle output (Positive Sawtooth – Triangle – Negative Sawtooth) (5Vp-p)
Rectangle output (Wide Pulse – Square – Narrow Pulse)(0 – +5V)
- 8. Noise Generator
- Pink noise output (5Vp-p)
White noise output (5Vp-p)
- 9. Sample and Hold
- Clock trigger input (–>GND)
Sample signal input (5Vp-p max.)
S/H output (5Vp-p max.)
- 10. Modulation VCA
- Control voltage input (0 – +5V)
Signal input (-5V – +5V)
Signal output (-5V – +5V)
- 11. Manual controller
- Control wheel output (-5V<--0V-->+5V)
Momentary switch output (–>GND)
- 12. Signal out
- Signal output (mono 1/8″ mini phone jack, 2Vp-p output impedance 3.5k Ω)
- 13. Head phones
- Head phones output (Stereo 1/8″ mini phone jack, 33 Ω 48mW)
- 14. USB
- Type B, USB-MIDI Input/Output
*Only note messages (velocity is not used) can be transmitted and received.
- 15. MIDI
- MIDI Input
*Only note messages (velocity is not used) can be transmitted and received.
- Others
- Power Consumption
- 9W
- Power Supply
- DC9V
- Dimensions
(W x D x H) - 493 ×257 × 208 mm / 19.41 x 10.12 x 8.19 inches
- Weight
- 4.8 kg / 10.58 lbs.
- Accessories
- AC adaptor (9V/1.7A), Patch Cord x 10
* All product, company, and standard names are trademarks or registered trademarks of their respective holders.
* Appearance and specifications of products are subject to change without notice.
* Appearance and specifications of products are subject to change without notice.
