- Recorder section
- Number of tracks
- 2 tracks, 2 tracks simultaneous playback/2 tracks simultaneous recording
- Recording formats
- – 1-bit audio format: 2.8 MHz @ 1-bit, 5.6 MHz @ 1-bit, DSDIFF format (extension .dff), DSF (extension .dsf), WSD (extension .wsd)
– PCM audio format: BWF (extension .wav) 44.1 kHz @ 16/24 bit, 48 kHz @ 16/24 bit, 88.2 kHz @ 24 bit, 96 kHz @ 24 bit,176.4 kHz @ 24 bit, 192 kHz @ 24 bit
– MP3 audio format (playback only): 44.1kHz/32kbps – 320kbps
- Recording
- Maximum approximately: 190 hours at 44.1 kHz/16 bit, 23 hours at 5.6 MHz/1- bit (for 128 GB SSD), Maximum continuous recording 6 hours
- SSD (Solid State Drive)
- 128GB
- Projects
- Recognizes a maximum of projects four hundred projects of each folder. Management of up to 160,000 Projects
- Mark points
- 100 points per project *No mark names
- USB functionality:
- Connect to computer via USB 2.0, usable as FAT32 USB external drive
- Project editing
- Rename, Delete, Protect
- MR Control Link
- Transport, Recording formats, Mark (registration, move)
- General
- Display
- 160 x 104 pixel, LCD with backlight
- Level meter
- -54dBFS – 0dBFS (PCM audio); -54dBSACD – +3dBSACD (1-Bit audio); L and R each provide 23-step LED + peak LED with adjustable hold time and dimmed (off) mode
- Power supply
- AC100 –240 V
- Power consumption
- 20 W
- Dimensions (W x D x H)
- 482 x 220 x 45 mm / 18.9″ x 8.6″ x 1.7″ (Including protrusions), 1U
- Weight
- 2.8 kg/6.17 lbs.
- Main Specifications
- Frequency response
- 10 Hz –20 kHz ± 1 dB@ Fs 44.1 kHz / 48 kHz, 10 Hz– 40 kHz ± 1 dB@ Fs 88.2 kHz/96 kHz/176.4 kHz/ 192 kHz, 10 Hz– 100 kHz (1-bit)
- S/N
- 103 dB (typical) @ IHF-A
- THD+N
- 0.005% (typical), 20 Hz –20 kHz
- A/D conversion
- 2.8224 MHz/5.6448 MHz (1-bit), 24bit (PCM)
- D/A conversion
- 2.8224 MHz/5.6448 MHz (1-bit), 24bit (PCM)
- Line In L/R (XLR)
- Connector
- XLR-3-31 type (balanced)
- Input impedance
- 22 k Ohms
- Nominal level
- +4 dBu (REC LEVEL=0dB)
- Maximum level
- +24 dBu
- LINE IN L/R (RCA)
- Connector
- RCA (Unbalanced)
- Input impedance
- 50k Ohms
- Nominal level
- -6 dBV (REC LEVEL = 0 dB)
- Maximum level
- +10 dBV
- LINE OUT L/R (XLR)
- Connector
- XLR-3-32 type (balanced)
- Load impedance
- 600 Ohms or greater
- Nominal level
- +4dBu
- Maximum level (0dBFS 0dB-SACD):
- +16 dBu (Nominal level= -12dBFS), +18 dBu (Nominal level= -14dBFS), +20 dBu (Nominal level= -16dBFS), +22 dBu (Nominal level= -18dBFS), +24 dBu (Nominal level= -20dBFS)
- LINE OUT L/R (RCA)
- Connector
- RCA (Unbalanced)
- Load impedance
- 47 k Ohms or greater
- Nominal level
- -6 dBV (REC LEVEL=0dB)
- Maximum level
- + 6dBV
- Phones
- Connector
- 1/4″ stereo phone jack
- Load impedance
- 16 Ohms or greater
- Maximum level
- 170 mW + 170 mW @ 32 ohms
- S/P DIF In/Out (coaxial)
- Connector
- RCA pin
- Format
- IEC60958
- Word Clock In/Out
- Connector
- BNC receptacle, 75 Ohms
- USB
- Connector
- Type B
- Format
- USB 2.0 compliant, USB mass storage class
- Supported operating systems
- Windows 7, or later Mac OS X 10.8 or later
- Included Items
- AC power cable, Install CD (“AudioGate” audio file conversion application)
Demo Projects | |
“All Most Blues”, “The Wind and the Wheat” | |
performed by Phil Keaggy copyright Phil Keaggy 2006 www.philkeaggy.com | |
* “DSD” is a registered trademark. | |
* Logos, product names, and company names are their trademarks or registered trademarks. | |
* Appearance and specifications are subject to change without notice. |