ARP 2600 FS
- Operating temperature range
- 0 – +40 °C (non‐condensing)
- Maximum Polyphony
- 2 voices for duo phonic; normally monophonic
- VCO-1 (Voltage Controlled Oscilator 1)
- Waveforms
- Sawtooth, square
- Frequency range
- Approx. 0.03 Hz – 30 Hz (low freq. mode)
Approx. 10 Hz – 10 kHz (audio mode)
- Voltage controlled response
- 1V/oct.
- VCO-2 (Voltage Controlled Oscilator 2)
- Waveforms
- Sawtooth, pulse (dynamic pulse), triangle, sine
- Frequency range
- Approx. 0.03 Hz – 30 Hz (low freq. mode)
Approx. 10 Hz – 10 kHz (audio mode)
- Pulse width
- 10% – 90%
- Voltage controlled response
- 1V/oct.
- VCO-3 (Voltage Controlled Oscilator 3)
- Waveforms
- Sawtooth, pulse (dynamic pulse)
- Frequency range
- Approx. 0.03 Hz – 30 Hz (low freq. mode)
Approx. 10 Hz – 10 kHz (audio mode)
- Pulse width
- 10% – 90%
- Voltage controlled response
- 1V/oct.
- VCF (Voltage Controlled Filter)
- Type
- Low-pass (TYPE I : early 24 dB/oct., TYPE II: late 24 dB/oct.)
- Frequency range
- Approx. 10 Hz – 10 kHz
- Resonance
- 1/2 – self oscillate
- VCA (Voltage Controlled Amplifier)
- Control voltage
- AR type (internally connected)
ADSR type (internally connected)
- Noise generator
- Noise spectrum types (white and pink)
- RING MODULATOR
- Type
- Analog multiplier
- Input signal (Internally connected)
- VCO-1 sawtooth wave, VCO-2 sine wave
- SAMPLE & HOLD
- Sampled signal
- Noise (internally connected)
- AUDIO OUTPUT JACKS
Front Panel (LEFT, RIGHT OUTPUT jacks
- Connector
- φ3.5 mm monaural phone jack
- Maximum output level
- +9 dBu @ 10 kΩ load
- Output impedance
- 1.2 kΩ
- Side Panel R
- Connector
- XLR端子
- XLR connector
- Maximum output level
- +4 dBu @ 600Ω load
- Output impedance
- 1.2kΩ
- HEADPHONES JACK
- Connector
- φ6.3 mm stereo phone jack
- Maximum output level
- 50 mW + 50 mW @ 33Ω load
- Output impedance
- 20Ω
- EXTERNAL AUDIO INPUT (PREAMPLIFIER INPUT) JACK
- Connector
- φ3.5 mm monaural phone jack
- Maximum input level
- −10 dBu
- Input impedance
- 100kΩ
- MIDI connector
- IN, OUT, THRU
- USB port
- Type B
ARP 3620 (keyboard unit)
- Keyboard
- 49-note (with aftertouch, no velocity sensitivity)
- CV output voltage
- UPPER VOICE
- −3V–+10V, 1V/oct.
- LOWER VOICE
- −3V–+7V, 1V/oct.
- LFO output voltage
- TRIANGLE
- ±5 V, 10 Vp-p
- SQUARE WAVE
- +10 V, 10 Vp-p
- DELAYED SINE WAVE
- ±3 V, 6 Vp-p
- EXTERNAL VIBRATO input voltage
- Max. ±10 V
- VIBRATO DEPTH slider
- Max. 1 octave
- VIBRATO DELAY slider
- 0 – 2.5 sec
- LFO SPEED slider
- Approx. 0.25 – 25 Hz
- PITCH BEND control
- ±1 octave
- TRANSPOSE switch
- ±2 octave
- PORTAMENTO SPEED slider
- Maximum speed: about 0.25 msec/oct
Minimum speed: about 0.5 sec/oct
- PORTAMENTO foot switch
- KORG PS-1/PS-3 pedal switch
- INTERVAL foot switch
- KORG PS-1/PS-3 pedal switch
- GATE output voltage (on ARP 2600 FS panel)
- 0 V at all keys up, +10 V at key on
- TRIGGER output voltage (on ARP 2600 FS panel)
- +10 V, 0.5 ms pulse wave at key on
- Arpeggiator
- OFF, AUTO, UP, DOWN, UP&DOWN, RANDOM, SEQ PLAY
General
- Power supply
- AC power supply terminal
- Power consumption
- 30W
- Dimensions (W × D × H), Weight
- ARP 2600 FS
- 836 x 232 x 509 mm / 32.9 x 9.13 x 20.0 inches, 19.3 kg / 42.55 lbs.
- ARP 3620
- 914 x 274 x 158 mm / 36.0 x 10.8 x 6.2 inches,11.3 kg / 24.91 lbs.
- Included Items
- Road case, Casters (x4), AC power cord, 8-pin DIN cable, 1,100 mm patch cables (x5), 600 mm patch cables (x5), Owner’s manual, Original English manual (replica)
- Accessories (Sold separately)
- KORG PS-1/PS-3 pedal switch
| * | All products names and specification names are trademarks or registered trademarks of their respective owners. |
|---|---|
| * | Appearance and specifications of products are subject to change without notice. |
